description

Configures this extended VLAN‘s description

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

description <WORD>

Parameters

description <WORD>


description <WORD>	Configures a description for this VLAN bridge <WORD> – Enter a description. The description should be unique to the VLAN‘s specific configuration to help differentiate it from other VLANs with similar configurations.

Example

nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#description “This is a description for the bridged VLAN”

nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#show context
 bridge vlan 1
 description "This is a description for the bridged VLAN"
 bridging-mode isolated-tunnel
 ip igmp snooping
 ip igmp snooping querier
nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#

Related Commands


no	Removes VLAN‘s description